As for a little overview regarding the said brand, Sonotrax Lite has an ergonomic design, compact and light and an easy-to-use feature. So very easy to use just as using your other home appliance. It also has the accurate FHR detection with clear sound, in addition to its high sensitivity interchangeable probe.
In addition, this fetal doppler has a built-in audio recorder and large backlight LCD display. It also supports 2MHZ, 3MHZ, 4MHZ, 8MHZ waterproof probes. With regards to power usage, it has long time continuous use (of about 8 hours) and an automatic power-off.
Finally, this baby monitor can surely meet the routine examination requirements of obstetricians, midwives and pregnant woman themselves. Sonotrax Lite is for simple auscultation (intermittent listening).
And now for its effective results, just kindly follow these great tips:
- It may be helpful if you are on a full bladder during the procedure.
- If you are in your early pregnancy stage, start in the middle of the abdomen (stomach), in line with the belly button right above the pubic hair. Or, if you have heard the baby’s heartbeat at the doctor’s office and remember where they were holding the doppler, then this is a good place to start.
- Then start to move the probe slowly – it is quite easy to scan over too fast, missing the heartbeat.
- Gently tilt the probe downward toward the pubic bone.
- You should be sure to use plenty of doppler gel/lotion. If you run out of lotion, you can use any type of skin lotion.
- If you have trouble distinguishing the sounds you hear, listen to the audio clips included in the fetal doppler package as you bought it. These audio clips contain sounds with typical maternal background noise.
- It is common to pick up the heartbeat in two places when using the Doppler. You may hear the same heartbeat a few inches apart – do not be alarmed. Physicians listen for a difference in two heartbeats to determine if there are two fetuses.
- If you are carrying twins, it can be difficult to distinguish between the two heartbeats (even physicians have a tough time with this). It is best to count the heartbeats and find two different rates.
- If the light on the Doppler is red, first check to make sure both ends of the telephone type cord are plugged into the unit and transducer. If they are plugged in and the light is still red, then replace the battery. If the light is flashing green when the unit is on, the battery is low. Please replace the 9-volt battery.
- If no light comes on, make sure the battery is installed properly.
Hope you find these tips very helpful. In case you don’t have a fetal doppler yet at your home and planning to buy or rent for one, you can purchase at our website http://www.edandirect.com/ thru our secured online shopping feature using either your credit card or PayPal account.
Read more fetal doppler and monitor reviews at the following websites:
Soundproofing rooms using cheap do it yourself designs and materials. Easy home soundproof advice on acoustical materials eg drywall, panels, foam and tiles for sound proofing walls, floors, windows,ceilings in bedrooms,garages, basements,studios.
ReplyDeleteThe Doppler available is as small as a palm and still hears the voices in the womb with great accuracy. Many parents have heard their baby's heartbeat using such Doppler as early as 11 weeks.fetal doppler reviews
ReplyDelete